Your Blackcore unit will arrive with pre-configured BIOS profiles which automatically overclock the system for the best performance.

TABLE OF CONTENTS

• SPR-M / SPR-X / 3100-SM+ / 3100-SX+ / 3100-TX
• Raptor Lake - Z790
• Alder Lake - Z690
• Cascade Lake X - X299

To load a profile, you will need to enter the BIOS, after powering on your unit press ‘F2’ or ‘Delete’ during the Blackcore splash screen. Once in the BIOS, follow the platform specific guides below.

SPR-M / SPR-X / 3100-SM+ / 3100-SX+ / 3100-TX

Please follow the Profile Save & Restore guide.

Raptor Lake - Z790

Use the arrow keys to navigate to the ‘Tool’ section and press enter, then select ‘Asus USer Profile'. 

From here you can save and load profiles. The optimum Blackcore OC profile will already be loaded for you.

Alder Lake - Z690

Use the arrow keys to navigate to the ‘Tool’ section and press enter, then select ‘Asus USer Profile'. 

From here you can save and load profiles. The optimum Blackcore OC profile will already be loaded for you.

Cascade Lake X - X299

From the main screen navigate to the ‘Tool’ menu.

Select ‘ASUS Overclocking Profile’.

Here you will see an overview of the pre-configured profiles, in the ‘Load from Profile’ section input the number of the profile you wish to load and press enter.

You will be prompted to accept the changes, click yes or press enter.

The new profile settings are now loaded, the changes will need to be saved and the unit reset. To do this press ‘F10’, the changes will be listed for review click ‘OK’ or press enter to accept.