To get started with your Blackcore server please use the links below to find out useful information and take note of the general safety information provided.
Safety Information
Environment
The Blackcore server systems are designed to operate in the following environmental conditions:
Operation Temperature: 10°C – 27°C (50°F – 80°F)
Operation Relative Humidity: 25% - 85% (non-condensing)
Non-Operation Temperature (Storage): -10°C – 70°C (14°F – 158°F)
Non-Operation Relative Humidity (Storage): 20% - 90% (non-condensing)
Power
1300W Redundant High Efficiency (92% 230VAC) 80 Plus Platinum Power Supply
Power rating: 115-230V AC 50-60Hz 12-8A
General Safety
Equipment must be connected to an earthed power supply with sockets nearby and easily accessible. Please ensure all vents are kept clear from obstruction to prevent overheating during usage. Power cords must be appropriately rated and approved accordingly to the regulations of the country of use.
Always turn off your Blackcore server and unplug the power cord before replacing the motherboard CMOS battery. Always replace battery with an equivalent one; there is a danger of explosion if the battery is replaced with an incorrect model. Used batteries must be handled and disposed of in accordance with local environmental regulations.
Blackcore cannot be held responsible for injury or equipment damage if the product is used for anything other than its intended purpose. If you have any questions regarding the safe and proper use of your server, please contact Blackcore support.
Peripherals
Each server is delivered with the following peripherals included in the box:
- Rail kit
- 2x IEC extension cables
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article