3100-RL/RZ - Removing specific sensors from IPMI monitoring.

When working with 3100 - RL+/ RZ/X units you will notice that when the unit turns on the IPMI card logs an errors as the IPMI card boots up before talking to the motherboard and its associated sensors. Using a tool called IPMItool you can disable certain sensors to stop these logs being created. **Note: IPMItool is a linux based application **

The ID for the sensor will need to be retrieved, this can be done with - ipmitool sdr elist(The outlined area is where you get the hex code for the sensors, only the first two values need to be taken. e.g CPU Input Voltage you will only need 1B)

Bellow are commands to disable sensors:

Once this is done you can redo the command ipmitool sdr elist and you should see the above sensors set to disabled